ABSTRACT
In tissue engineering (TE), temporary three-dimensional scaffolds are essential to guide cell proliferation and to maintain native phenotypes in regenerating biologic tissues or organs. To create the scaffolds, rapid prototyping (RP) techniques are emerging as fabrication techniques of choice as they are capable of overcoming many of the limitations encountered with conventional manual-based fabrication processes. In this research, RP fabrication of solvent free porous polymeric and composite scaffolds was investigated. Biomaterials such as polyetheretherketone (PEEK) and hydroxyapatite (HA) were experimentally processed on a commercial selective laser sintering (SLS) RP system. The SLS technique is highly advantageous as it provides good user control over the microstructures of created scaffolds by adjusting the SLS process parameters. Different weight percentage (wt%) compositions of physically mixed PEEK/HA powder blends were sintered to assess their suitability for SLS processing. Microstructural assessments of the scaffolds were conducted using electron microscopy. The results ascertained the potential of SLS-fabricated TE scaffolds.
Subject(s)
Biomimetic Materials/chemistry , Culture Techniques/methods , Durapatite/chemistry , Extracellular Matrix/chemistry , Ketones/chemistry , Polyethylene Glycols/chemistry , Tissue Engineering/methods , Benzophenones , Biomimetic Materials/chemical synthesis , Durapatite/chemical synthesis , Durapatite/radiation effects , Feasibility Studies , Hot Temperature , Ketones/chemical synthesis , Ketones/radiation effects , Lasers , Membranes, Artificial , Polyethylene Glycols/chemical synthesis , Polyethylene Glycols/radiation effects , Polymers , Surface PropertiesABSTRACT
Polyetheretherketone-hydroxyapatite composites were developed as alternative materials for load-bearing orthopedic applications. The amount of hydroxyapatite (HA) incorporated into the polyetheretherketone (PEEK) polymer matrix ranges from 5 to 40 vol% and these materials were successfully fabricated by injection molding. This study presents the mechanical and biological behavior of the composite materials developed. It was found that the amount of HA in the composite influenced the tensile properties. Dynamic behavior under tension-tension fatigue revealed that the fatigue-life of PEEK-HA composites were dependent on the HA content as well as the applied load. The biological responses of PEEK-HA composites carried out in vivo verified the biocompatibility and bioactive nature of the composite materials.
